CodeRage XII session files – Directly Using The Android API

My CodeRage XII session on Directly Using the Android API has been aired on the Internet. If you saw it I hope it came across reasonably well (interruptions notwithstanding) and might prove useful to you in your endeavours with Android.

As promised, the slides and samples are now available at this link. Do enjoy, now ˚◡˚   [ Update: the broken link has been fixed ]

Apologies for the interrupted video transmission during the conference. Rest assured that as soon as Jim can manage it, pretty much all the CodeRage videos will be made available for replay. As soon as mine is available I shall be updating this post with the link and also linking to it on my Conference Talks web page. You can see it at your leisure now here at Embarcadero Academy.

CodeRage XII session

A whole 5 years ago (!) I did a session for CodeRage 7 on accessing the Android API. This was not long after RAD Studio XE5 introduced support for developing Android applications, and Delphi’s Android support was in its first stage.

5 years on and CodeRage XII is starting today. I’ll be doing an updated talk on the same subject covering all that’s new in RAD Studio 10.2 at 3pm CST today, Tuesday 7th November 2017. I hope you can join me!

A full timetable of sessions is available in this PDF download in case you’re having trouble working out which sessions to attend.

Sad for me (due to working on-site meaning I won’t be able to catch them – alas they won’t be made available as replays!) but hopefully fabulous for many of you (if you can attend the sessions) is the inclusion in the list of speakers of a couple of legends in their areas:

• Robert Martin (aka Uncle Bob Martin), author of Clean Code, 7am-9am 7th November 2017.
• Steve McConnell, author of the classic Code Complete (among others), 12pm-1pm 8th November 2017.

These are well respected industry luminaries and Malcolm Groves, among others, has a lot to say about them.

Enjoy CodeRage XII!

‘What if?’ scenario analysis in the CPU window

Last Tuesday, 24th October I did some sessions at EKON 21, one of which was on Creative Debugging Techniques. During the session there was a section where I was trying to demonstrate an idea or technique that happened to fully involve the CPU window. Unfortunately a series of finger fumbles on my part meant I couldn’t show what I wanted to show, albeit I think the point was made.

Anyway, I mentioned that maybe I’d write up that little snippet into a blog post, just to prove that it really does work as I suggested it does, and so here it is.

Remote debugger recalcitrance

My development machine in my main week day job does not have some custom hardware that a nearby test machine does. It doesn’t make sense to load up the development environment onto the test machine for various reasons, so I am a fairly irregular user of remote debugging against my Win32 application.

As it happens the client language is C++Builder (classic compiler), but I expect this issue to apply equally to Delphi (I’d be interested to know from anyone who can confirm one way or another).

Remote debugging works quite nicely via PAServer. It is certainly straightforward in comparison to the games we had to play some years back – PAServer seems to have simplified the setup quite nicely.

Granted, stepping is pretty slow, but then there’s quite a lot going on and a certain amount of information for PAServer retrieve from the remote debugger (rmtdbg250.exe) and then to send back to PAClient and to the IDE, so I can take that.

What gets my goat, though, is what happens when the program ends. Often I have to kill the application (Ctrl+F2, or Run, Program Reset), but often the application exits quite naturally.

More often than not I can’t make a change in the code and have F9 successfully compile and run up the app remotely again. I get this:

[PAClient Error] Error: E0009 Cannot create file "\\?\C:\Program Files (x86)\Embarcadero\PAServer\19.0\scratch-dir\some_subfolder\project_name\project_name.tds". The process cannot access the file because it is being used by another process

Project corruption bug

Long ago there was an issue with the RAD Studio IDE (Delphi and C++Builder both). It meant that when changing certain project options or switching build configurations, the (XML format) project file would get saved with an extra errant (empty) XML element in it, causing subsequent compilations to baulk, complaining about: ProjectExtensions appears multiple time in project. If you build from the command line the error looks like: [MSBuild Error] MSB4079 The <ProjectExtensions> element occurs more than once.

The extra line in the file, were you to open it in a text editor and take a look, will be rather like this:

    <ProjectExtensions />

If you peruse some of the entries in Embarcadero’s Quality Central portal, such as this, this or even this, then you’ll see that Embarcadero made some changes in XE6 that improved matters (done against Quality Central bug 109016, no longer accessible since QC went offline some while back, but in this list of XE6 fixes), but clearly has not dismissed the problem entirely. Various customers do continue to hit it, albeit not very reproducibly.

Delphi build/install/launch Android app from the command-line

Quite some while back I answered a question on Stack Overflow, which explained how to build a Delphi project from the command line and also how to deploy it. The context of the question was Andriod development

In the case of an Android application deploying it has absolutely nothing to do with installing the resultant .apk file onto your Android device, despite what your personal interpretation of the word may be. Oh no, most definitely not.

Instead, deployment is about packaging up all your various files - your compiled Android library (a .so file), all the images, splash screens, icons, custom files, databases, application manifest file and so forth – all into an .apk file. In other words as far as the Delphi IDE is concerned, deploying a Delphi project means going from a .so native ARM library to an installable .apk file.

Clearly when you press F9 or Ctrl+Shift+F9 to run your application the IDE works out how to install your .apk on the currently connected and selected device, but that is subsequent to the IDE’s notion of the deployment step.

So, installation notwithstanding, that SO answer shows how to make/build and deploy a Delphi project, such as an Android project, from a RAD Studio command prompt:

EKON 21

I’m delighted to say that later this month I’ll be over in Cologne speaking at EKON 21, which runs from 23rd to 25th October, 2017 and is being held in Cologne in Germany.  I’m doing three Delphi-related talks on some of my favourite subjects: creative debugging, Android API usage and IDE tips/techniques.

Unfortunately, though, being as all three talks are in the same day, Tuesday 24th October, I’m not sure I’ll get to see much of the other great talks on offer, which is a shame for me.

It’s great to be heading back to EKON – I haven’t been over to Germany for a conference since long ago in 2004 at the joint BorCon Europe 2004 / EKON 8 conference in Frankfurt.